7 Steps to Fix Startup Errors on Windows 11 Home 64

Gabriella browne

Apr 30, 2025 - 05:56

Nov 30, -0001 - 00:00

Have you ever encountered a situation where your Windows 11 Home 64 system fails to start properly?

Perhaps you see a blue screen, experience freezing, or face other startup errors. These issues can arise for several reasons, from corrupted system files to hardware incompatibilities.

But how do you even begin to tackle these frustrating problems?

Fortunately, Windows 11 has built-in tools and methods that can help resolve most of these problems.

The Ease US says Windows 11 repair may cause some data loss. There are no guarantees. Therefore, before fixes, we highly recommend you restore and backup data.

In this article, we’ll guide you through seven essential steps to troubleshoot and fix startup errors on your Windows 11 Home 64 machine.

Let’s get started.

1. Perform a Hard Reboot

A simple reboot can resolve many startup issues by resetting the system’s hardware and software state. A simple reboot can fix many startup issues by resetting the system’s hardware and software.

If your IdeaCentre AIO AMD Ryzen 27 inch desktop is stuck on startup or in a boot loop, try a hard reboot by holding the power button for 10-15 seconds. This can resolve temporary errors and get your system back to normal quickly.

How to Hard Reboot:

Press and hold the power button for 10 seconds until the computer shuts down.
Wait for a few seconds before turning it on again.
Check if the issue persists after the reboot.

While this step is simple, it can be effective if the error is caused by temporary glitches or a stalled process during the boot sequence.

2. Boot into Safe Mode

Safe Mode is a diagnostic startup mode that loads only essential system files and drivers. This allows you to troubleshoot problems without interference from third-party applications or drivers that might be causing startup errors.

Steps to Boot into Safe Mode:

Step 1: Turn on your PC. As soon as the Windows logo appears, press the Power button and hold it until the PC shuts down.
Step 2: Repeat the process 2-3 times to trigger the Windows Recovery Environment (WinRE).
Step 3: Once in WinRE, navigate to Troubleshoot > Advanced options > Startup Settings.
Step 4: Click Restart, and once your PC restarts, select 4) Enable Safe Mode using the number key.

Benefits of Safe Mode:

It helps identify issues with installed software, drivers, or system updates.
Allows you to remove recently installed software or restore system settings without affecting critical files.

3. Run Startup Repair

Windows 11 Home 64 has an automatic repair tool that can scan and fix common boot-related errors, such as corrupted system files, missing boot records, or damaged system settings.

Microsoft says your device requires at least 16 GB of free space to upgrade a 32-bit OS or 20 GB for a 64-bit OS.

How to Use Startup Repair:

Step 1: In WinRE (as described in Safe Mode), go to Troubleshoot > Advanced options > Startup Repair.
Step 2: Choose the account that you use to log in and enter your password.
Step 3: Windows will begin diagnosing the system. Once the process is complete, it will attempt to fix any detected issues automatically.

When to Use:

Use this tool if Windows 11 is unable to boot up or is stuck on the login screen.
The process typically takes a few minutes, and your PC may restart multiple times.

4. Check Disk for Errors

Corrupted disk sectors or damaged system files can lead to startup issues. If you are facing startup issues on your IdeaCentre AIO AMD Ryzen 16 GB desktop, corrupted disk sectors or damaged system files could be the root cause. Running the Check Disk Utility (CHKDSK) is a simple and effective way to identify and repair any disk errors affecting your system's performance.

Steps to Run CHKDSK:

Step 1: Boot into Safe Mode or WinRE.
Step 2: Open Command Prompt by navigating to Troubleshoot > Advanced options > Command Prompt.

Step 3: Type the following command and press Enter:
bash

Step 4: The system will check and repair the hard drive. Depending on the size of your hard drive and the number of errors, this process can take several minutes or hours.

What CHKDSK Does:

/f fixes errors on the disk.
/r locates bad sectors and recovers readable information.

This step ensures that your hard drive is not contributing to the startup issue.

5. Restore Your System with System Restore

System Restore allows you to revert your PC back to a previous state when it was functioning properly. This can be helpful if recent software changes or updates have caused the startup error.

How to Use System Restore:

Step 1: Boot into WinRE.
Step 2: Navigate to Troubleshoot > Advanced options > System Restore.
Step 3: Follow the on-screen instructions to select a restore point from when your PC is working correctly.
Step 4: The system will restore the settings, drivers, and software from that point, undoing any recent changes.

Why Use System Restore:

It helps if recent updates or drivers cause instability.
It allows you to recover your PC without deleting personal files or applications.

6. Update Graphics and System Drivers

Outdated or incompatible drivers can cause system crashes and startup errors. Updating your drivers—especially the graphics and chipset drivers—can help resolve these issues.

How to Update Drivers:

Step 1: Boot into Safe Mode or Normal Mode.
Step 2: Open Device Manager by pressing Windows + X and selecting Device Manager.
Step 3: Expand the Display adapters section, right-click on your graphics card, and choose Update Driver.
Step 4: Follow the on-screen instructions to search automatically for updated driver software.
Step 5: Repeat the process for other important drivers like network adapters and storage controllers.

When to Update Drivers:

If the issue started after a recent update or after installing new hardware, outdated drivers may be the cause.
Driver updates improve system stability and performance.

7. Reset Your PC

If none of the above steps resolves the issue, a complete reset of your Windows 11 installation may be necessary. Resetting your PC reinstalls Windows but allows you to keep your files or remove everything for a fresh start.

Steps to Reset Your PC:

Step 1: Boot into WinRE.
Step 2: Navigate to Troubleshoot > Reset this PC.
Step 3: Choose whether to keep my files or remove everything.
Step 4: Follow the on-screen instructions to initiate the reset process.

When to Reset:

Use this step if your system is still unstable after trying the previous fixes.
This option can take some time, so ensure you have a backup of important data before proceeding.

Conclusion

Windows 11 Home 64 startup errors can be frustrating, but by following these seven steps, you can efficiently troubleshoot and resolve most issues. Whether performing a simple hard reboot, running the Startup Repair tool, or resetting the system entirely, Windows provides several built-in tools to help ensure your system starts up smoothly.

Always remember to back up your important files regularly, as some solutions, like resetting your PC, may lead to data loss. Hopefully, this guide has equipped you with the knowledge to fix those startup errors and get your Windows 11 system up and running again quickly.

Gabriella browne Gabriella Browne is a technology strategist with expertise in AI, blockchain, and cybersecurity. She specializes in digital transformation, helping businesses innovate through advanced technologies. With a background in software engineering, Gabriella drives impactful solutions across diverse industries.